I. Basic Information
Date: January 16-17, 2027
Venue: Tianjin, China (to be confirmed)
Online Platform: Scientific.Net
Indexing: Scopus
II. Conference Introduction
The 1st International Conference on Low-Carbon Functional Materials and Green Engineering for Resource Utilization will be held from January 16 to January 17, 2027. This conference focuses on low-carbon functional materials, green manufacturing technologies and efficient resource utilization. It provides an academic exchange platform for researchers, engineers and industry practitioners to share innovative research results, discuss industry challenges and explore sustainable development paths in materials engineering.
III. Organizers
Host: Wonford Press Limited
Co-organizers: Tianjin Boting Business Travel Service Co., Ltd.
Oceanwide Consulting (Tianjin) Co., Ltd.
IV. Members of the Academic Committee
Conference Chair
Prof. Xueyong Chen, Fujian Agriculture and Forestry University, China
Senior Eng. Wenxing Su, University of Chinese Academy of Sciences, China
Assoc. Prof. Weiqing Cheng, China University of Petroleum, Beijing, China
Senior Eng. Ming Zhang, Institute for Intelligent Molecular Interdisciplinary Science, Tianjin Normal University, China
Assoc. Prof. Cheng Yong, Jiangsu Academy of Agricultural Sciences, China
Assoc. Prof. Funing Ma, Qingdao University of Technology, China
| Technical Program Committee Chair |
| Eng. Mingyuan Wang, Ural Federal University, Russia Lect. Ying Zhang, Huazhong Agricultural University, China Assoc. Prof. Chengjie Li, Jiangsu Ocean University, China Dr. Sen Liang, Institute of Process Engineering, Chinese Academy of Sciences, China |
| Organizing Committee Chair |
| Senior Eng. Chenyu Li, Coal Comprehensive Multi-utilization and Management Technology Consulting Center, China Prof. Keqi Zhou, National University of Singapore, Singapore Assoc. Prof. Shanyun Sun, Nanjing Drum Tower Hospital, China Prof. Jiutao Hang, Northwestern Polytechnical University, China |
| Publication Chair |
| Dr. Yao Li, Beijing Institute of Technology, China Lect. Jianfei Ding, Qingdao University of Science & Technology, China Dr. Yanli Xu, University of Oxford, United Kingdom Lect. Xiaolei Shi, Shanxi University of Electronic Science and Technology, China |
V. Keynote Speakers
To be determined
VI. Call for Papers – Topics
Topics include but are not limited to:
| Green synthesis of low-carbon functional materials and regulation of their properties | Green Engineering for High-Value Recycling and Utilization of Solid Waste Resources | Full-process Low-carbon Engineering Application Technology |
| New carbon-based low-carbon functional materials (graphene, carbon nanotubes, porous carbon, biomass carbon aerogels) Low-energy-consumption inorganic low-carbon functional ceramics and mineral-based eco-friendly composite materials Biodegradable polymer green functional materials (fully bio-based plastics, CO₂-polymerized plastics) Metal-based low-carbon lightweight structural/catalytic integrated functional materials Low-carbon functional fillers and modified composite materials derived from solid waste New low-temperature/ambient-temperature synthesis processes and low-energy preparation technologies for low-carbon materials Low-carbon modification of material interfaces, defect regulation and catalytic efficiency enhancement mechanisms Carbon neutrality-oriented adsorption and separation functional materials (for CO₂, VOCs and heavy metal adsorption) Photoelectrocatalytic low-carbon functional materials (photocatalytic hydrogen production, CO₂ reduction catalytic materials) Green materials for low-carbon functional electrodes and solid-state electrolytes in energy storage Low-VOC and heavy-metal-free eco-friendly coatings and catalytic thin-film materials Design and green synthetic routes of bionic low-carbon functional materials Development of low-carbon catalytic materials with reduced rare earths or no precious rare metals Green large-scale preparation and safety management of nano low-carbon materials Low-carbon thermal insulation and energy storage functional materials based on aerogels and porous frameworks | Comprehensive low-carbon resource utilization of metallurgical slag, steel slag and fly ash Fabrication of low-carbon building materials and functional fillers from construction waste and mine tailings High-value green conversion of full components of agricultural and forestry biomass waste New modified materials recycled from waste plastics, rubber and chemical fibers Low-carbon hydrometallurgical/pyrometallurgical recovery processes for waste lithium batteries and electronic waste Low-carbon resource disposal technology for synergistic treatment of sludge, kitchen waste and solid waste Engineering for solid waste stabilization via CO₂ mineralization and preparation of low-carbon carbon sequestration building materials Development of low-cost green processes for extracting functional materials from renewable resources Carbon footprint accounting and carbon reduction optimization schemes for solid waste recycling processes Complete green equipment with low energy consumption for sorting, activation and modification of solid waste New harmless and synergistic low-carbon resource utilization technologies for industrial hazardous waste Development of low-carbon concrete and thermal insulation wall materials with recycled aggregates Carbon sequestration by biochar for soil improvement and recycling engineering of agricultural and forestry waste Low-carbon coupled process system for cross-industry collaborative disposal of solid waste Low-carbon standards and circular evaluation systems for renewable resource industrial chains | Functional materials and complete engineering technologies for CCUS (Carbon Capture, Utilization and Storage) Supporting engineering of new low-carbon energy-saving materials for industrial kilns and chemical processes Low-carbon material systems for new energy industries (photovoltaic, wind power and hydrogen energy material engineering) Application of low-carbon materials and green construction technologies throughout the whole life cycle of buildings Green catalytic and adsorptive materials for water pollution treatment and low-carbon water treatment engineering Low-carbon catalytic materials for collaborative removal of air pollutants and tail gas treatment engineering LCA carbon accounting and emission reduction evaluation methods for the whole life cycle of low-carbon materials Intelligent manufacturing of low-carbon materials and optimization technologies for green chemical processes Green functional materials for soil heavy metal remediation and in-situ low-carbon remediation engineering Engineering of low-carbon porous adsorption materials and alloy hydrogen storage materials for hydrogen energy storage and transportation Green low-carbon membrane material technologies for seawater desalination and saline-alkali land improvement Integrated recycling systems and demonstration projects of low-carbon materials in industrial parks Collaborative pollutant control technologies for green manufacturing of low-carbon materials Industrial policies, standards and industrialization paths of low-carbon materials under the dual carbon goals Key bottlenecks and solutions for pilot test and industrial scale-up of low-carbon functional materials |
VII. Publication
All submissions received by this conference will be independently reviewed by two professional reviewers in relevant fields. Accepted papers will be formally published in conference proceedings by Trans Tech Publications Ltd. (TTP), with full texts hosted on the Scientific.Net database and submitted to Scopus for indexing.
VIII. Submission Guidelines
- Papers must be at least 6 pages (double-column) in length, written in English, and must not have been published or submitted to any academic journals or conferences at home or abroad.
- The conference template can be downloaded from the “Resources Download” section on the official website.
- The conference only accepts submissions in English. If you require translation services, please contact the person in charge of the conference.
- The conference adopts an online submission system, with full technical support provided by Wonford Press Limited.
- It is recommended that authors check for plagiarism using iThenticate or other reputable channels. Any manuscript rejected due to text reuse caused by the author shall be the sole responsibility of the author.
- Papers must be typeset in accordance with the template provided on the conference’s official website.
- If you require translation and polishing services for your manuscript, please contact the conference secretariat for detailed information.
- Full Paper Publication Workflow: Submission → Peer Review & Revision → Acceptance Notification → Payment of Article Processing Charge (APC) → Camera-ready Manuscript Submission → Conference Registration → Online Full-text Release (Online Publication) → Distribution of Printed Conference Proceedings → Indexing in the Scopus Database
IX. Tentative Conference Schedule (Offline Reference)
| Date | Time | Content |
| January 16, 2027（Saturday） | 08:30-09:00 | Registration |
| 09:00-12:00 | Keynote Speeches | |
| 12:00-14:00 | Lunch | |
| 14:00-17:00 | Oral Presentations | |
| January 17, 2027（Sunday） | 09:00-12:00 | Academic Visit (To be determined) |
Note: The detailed schedule will be announced via email 1–2 weeks before the conference.
X. Attendance Information
- Authors: One author per registered paper is entitled to free attendance.
- Keynote Speakers: Invited speeches subject to committee review.
- Oral Presentation: 10 minutes per presentation.
- Poster Presentation: A1 size, color printing required.
- Audience Attendance: Welcome to participate in discussions without paper submission.
Note: All participants will receive:attendance certificate, official conference invitation letter, exclusive conference souvenir and conference badge.
XI. Contact Us
Email: conference@wonford.com
Contact Person: Editor-in-Chief Hao
Contact Information:
